Lift beams and spreader bars for container lifting. Custom spreader frames, telescopic spreader bars.
AutoLoc Container Lift Slings
Economical container slings for low headroom, adjustability and standards-compliant design.
Many Models and Configurations in Stock
Designs for Uneven Load Handling
Click link for product information page
Links to page
Bottom Lift ISO Type Container Slings Bottom Lift
The most economical way to lift your ISO container. Tandemloc has designed and manufactured this simple and economical lift sling to meet ISO 3874 standards.
Bottom Lo-Lift Frame  20/40 Ft. ISO Container Sling, 40,000 LB. WLL
Headroom as low as 21 inches above the container (102" tall containers ) maintains minimum allowable sling angle of 30° when lifting from bottom corners. Lifts 20' or 40' containers. This frame has several lift points, for level lifting of unequally loaded containers.
Bottom Lo-Lift Frame  20/40 Ft. ISO Type 1 Container Sling Manual
If you are finding that our Low Profile Bottom Lift Slings are just not low enough, the AE24000B series may be the solution. This series offers a headroom as low as a scant 21 inches above the container (assuming the container is 102" tall) while still maintaining the minimum allowable sling angle of 30 degrees when lifting from the bottom corners (Ref ISO 3874 and ISO 1496). More...
Low Profile Sling, Bottom Lift ISO Type Container Sling
Very economical, uses wire rope slings instead of chain. does not offer load leveling except the model number ending in "-3MPA", which incorporate multiple lift points, offering some side-to-side load leveling capability.

ISO Container Bottom Lifting & Load Leveling Sling Assembly
Bottom lift slings for unevenly loaded containers - fast adjustment. No need to undo the lift shackle - just slide to the desired position. The chain slings adjust quickly, too. Pull the chain to desired length and "pinlock"to length.

Click here for a similar product with transverse adjustment.

K1000AA-200 & K1000AA-300
20 & 40 Ft. Container Bottom Lift Sling
These economical sling assemblies allow the user to lift from the bottom corner fittings and adjust for off-center loads in both longitudinal and transverse directions. They are compact and easy to store and ship.
Q2500AA-299 & Q2500AA-400C
10, 20, 30, 40 ft. Long by 8 and/or 10 ft. Wide Container Bottom Lift Sling
This highly adaptable Container Lift Sling allows the end user to lift 8 ft. and 10 ft. wide containers that are anywhere from 10, 20, 30, or 40 ft. long. Simply change the location of the chain sling legs to your preferred width.
20 Ft. Container Bottom Lift Sling
Leveling Multi-Hole Top Lift 99" Lfit Beam & Leg Shorteners. WLL 30,000 LB.
TACOM STYLE 20 & 40 ft. Container Bottom Lift Sling
Military ready, with CARC paint and provisions for securing the lift beam to the Grove crane. Lift from the bottom corner fittings and adjust for off-center loads in both longitudinal and transverse directions. Compact, easy to store and ship.
20 & 40 ft. Container Bottom Lift Sling
Incorporates 2 holes used to secure the beam to the crane when not in use. The holes fit the K08A00A series Viso Connector available separately.
Universal Load Leveling Lift Beam
Quick and easy adjustments to meet all application requirements. Adjusts in both transverse and longitudinal directions. Low headroom design.
ISO 3874 standards require that, when lifting containers from the bottom corner fittings, a lift sling must be used.
News at Tandemloc
  New Products: Pallet Lifters: See our new line of heavy-duty pallet lift equipment. Capacities range from 1 ton to 3 ton. More about TLOC Pallet Lifts!
  Tandemloc Wins North Carolina Safety Award! North Carolina Commissioner of Labor Cherie Berry presented Curt more...
  On the cover of Wire Rope Exchange magazine! See Tandemloc in this recent issue of Wire Rope Exchange - a little bit about us and our products!
Tandemloc Services
  RENT Tandemloc Equipment! We maintain a huge stock of lifting, securing and container mobilizing products for short and long-term rental.
  Proof Testing All Lifting Products: Our patent-pending 300 Ton Load Tester is a unique system affording reliable testing for all of our products.
  Maintenance and Repair of Tandemloc lifters: Certified inspectors using documented procedures in accordance with ASME B30.20 standards.

Your Name:


Email Address:


Products include lifting, mobilizing and securing products for below the hook and ISO container handling. Tandemloc provides standard corner fittings, lift beams, spreader bars, pipe end caps, container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more. See Site Map.

TANDEMLOC, Inc 824 Fontana Blvd. Havelock, NC 28532 USA

Toll-Free Tel: 1-800-258-7324 Toll-Free Fax: 1-800-892-3273 International Tel: (252) 447-7155 International Fax: (252) 447-5502

This website contains the proprietary information of Tandemloc, Inc. and its affiliates and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use. You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer, decompile, or take any other action to reproduce or replicate any aspect of this Website or the information contained herein.  Website Terms of Use

TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks of Tandemloc, Inc.
Any unauthorized use of these or other Tandemloc, Inc. trademarks is prohibited.

Tandemloc is an Equal Opportunity Employer

© 2017 Tandemloc, Inc. All rights reserved.

Designed and deployed by Industrial Advertising Links Page