Tacom-style Load Leveling Bottom Lift Sling for 20' & 40' ISO Containers

The Q2500AA-400 is military ready, with CARC paint and provisions for securing the lift beam to the Grove crane. These economical sling assemblies allow the user to lift from the bottom corner fittings and adjust for off-center loads in both longitudinal and transverse directions. They are compact and easy to store and ship.

• PROOF TESTED to 125% of Work Load Limit.
• WEIGHT: 1,563 LB. (1,748 LB. with PC 9 - PC 9 is the metal shipping container provided with each sling assembly.)
• MATERIAL AND FINISH: Steel with carc paint. MIL-P-64159, MIL-C-53039 OR MIL-C-46168

Product Notes

• Color as required by ordering activity. The chain & connector link pins/spacers are not painted. For Comml Primed & Paint Coating, see*
• All dimensions subject to Mfg. Tol.
• This sling assembly conforms to ANSI B30.9-1996, ANSI B30.19-199, B30.20 & I.S.O. 3874 Fgt.. Cont. Handling.
• Standard specification #EAD21000A applies
• Load leveling of this sling is accomplished by manually moving the top shackle; ie, by placing its bolt into one of the 13 holes provided for transverse leveling and by adjusting the chain leg lengths to level Longitudinally. Keep the chain lengths matched on each side. The chain is color marked at the center and every 10 links four places on each side of the center.
• The containers shown are typical ISO freight containers as described in ISO 668:1988(E) Designation
• 1AAA, 1AA, 1A, 1AX - all "40 FT." containers.
• 1CC, 1C, 1CX - all "20 ft" containers (19'-10' ½")
• This sling can also lift 1BB, 1B, 1BX "30 ft." containers (29'-11 1/4") & 1D & 1DX "10 ft." containers (9'-9 3/4") at their Max load rating.