PROUDLY MADE IN THE USA / Sales: 1-800-258-7324 / All Other Inquiries: 1-252-447-7155

S33000H Tiedown Ring

This S33000H Tiedown is a much larger version of the S33000A cargo tiedown offering a significant increase in load capacity.

It meets the requirements for the large cargo tiedown provision of MIL-STD 209K. The fully weldable steel housing contains the forged tiedown ring assembly that can swivel 360 degrees while also swinging up to 150 degrees on the horizontal axis, so that it can assume the angle of "pull", without a reduction in strength. The ring is an anchoring point for lashing hooks, shackles or a 3"wide band type securing strap when passed through the "straight bar" part of the ring.

  • Load Capacity: 50,000 LB. in any direction.
  • Safety Factor to Ultimate Strength: 66,000 LB. in any direction.
  • Conforms to Large Cargo Tiedown provision in MIL-STD 209K
  • WEIGHT: 21.56 Lbs.

We stock self-colored bulk-backed kits, however, a variety of corrosion-resistant finishes are available, including galvanizing followed by a black Dacrokote finish to reduce the reflectivity of the galvanizing (This finish was selected for the medium tactical vehicle replenishment program). The tiedown can be shipped as an assembly if preferred.

Product Notes

  • This tiedown rotates 360° about its vertical axis and a min of 150° about its horizontal axis. It is designed to swivel & swing to the tension load plane of the tiedown within those angles.
  • ASSEMBLY: After installing the housing (PC1), assemble PCs 2 to 5 into the configuration shown above. (NOTE: To insert PC 4 pins, rotate PC 2 for proper clearance).

Please Register For Price Quote

We are now offering Job Shop Services

Do you need fabrication work done? We offer a complete complement of welding, machining and painting capabilities and invite your inquiry.

Contact Us


Enhance Operations Track and Authenticate RFID

Already a member Login Here

Note W. Installation Weld

The PC 1 swivel body is cast ASTM A27, GR70-40 steel, a low carbon readily weldable steel. Installation welds can be made on any portion of the vertical sides with a continuous 9/32 to 3/8"fillet or bevel weld around the entire body. The weld symbol above is preferred.

1 1 1 1 1 S33001H-100 Swivel Housing, Self Colored
2 1 1 - - S33002H-M00 Swivel Retainer, Machined, Self Colored
3 1 1 - - S33003H-100 Tiedown Clevis, Self Colored
4 1 1 - - S33004H-300 Hinge Pin, Steel Self Colored
5 1 1 1 1 SCP0015XXXX0100 Cotter Pin, Stainless Steel
2 - - 1 - S33002H-MGB Swivel Retainer, Mach. Galv/Black Dacrokote
3 - - 1 - S33003H-1GB Tiedown Clevis, Galv./Black Dacrokote
4 - - 1 - S33004H-3DL Hinge Pin, Steel Dacromet/Dacrokote Black
2 - - - 1 S33002H-1C0 Swivel Retainer, Mach. Thermal Zinc Sprayed
3 - - - 1 S33003H-1C0 Tiedown Clevis, Thermal Zinc Sprayed
4 - - - 1 S33004H-3ZN Hinge Pin, Steel, Zinc Sprayed