S33000LD Flush Mounted Tiedown Ring

The S33000LD series tiedown conforms to Mil Std 209K.

This style incorporates a fully weldable housing that can be flush mounted rather than surface mounted like it's sister tiedown, the S33000E series. It rotates 360 degrees about the vertical plane and 150 degrees horizontal. It will swivel and swing to the load plane within these angles. The tiedown ring will work with hooks or you can lash flat bands to the ring's cross bar. For greater capacity, check out our 10,000 LB. capacity flush swivel tiedown or our 50,000 LB. capacity flush swivel tiedown.

• Meets MIL STD 209K - Class 4
• Load Capacity: 5,000 Lbs. (Single Tension, without yield)
• Safety Factor to Ultimate Strength: (7,500 LB) is 1.5 Min.
• Conforms to Large Cargo Tiedown provision in MIL STD 209
• WEIGHT: 3.5 LBs.

We stock self-colored bulk backed kits, however, a variety of corrosion resistant finishes are available, including galvanizing followed by a black Dacrokote finish to reduce reflectivity of the galvanizing (This finish was selected for the medium tactical vehicle replenishment program). The tiedown can be shipped as an assembly if preferred.

Product Notes

• Tiedown conforms to CLASS 4, MIL STD 209K & Cargo Bed Tiedown provision MIL STD 209K.
• This tiedown rotates 360° about its vertical axis and a min of 150° about its horizontal axis. It is designed to swivel & swing to the tension load plane of the tiedown within those angles.
• ASSEMBLY: After installing the housing (PC1), assemble PC's 2 to 5 into the configuration shown above. (NOTE: To insert PC 4 pins, rotate PC 2 for proper clearance).