N2501BA Series-Standard Fastmounts

Tandemloc Fastmounts are designed to fit standard ISO corner fittings and provide a loose fit lock to allow for accumulating tolerances between the container, corner fitting, and Fastmount.Our N2501BA series twistlock may be welded to your surface, or can be purchased welded to a variety of base plates, which can have mounting holes for bolt-on connection.

For slack-free fit, try our Vertical VISO's. The Fastmount may be used on ship decks or trailers to secure containers.

Features

• MATERIAL: Steel, paint primer coat
• Strength ratings at yield point:
  Upward Restraint - 51,000 LB. (Tensile)
  Compression - 201,000 LB. (On Body)
  Transverse Shear - 76,000 LB.
  Longitudinal Shear - 40,000 LB.
• CAUTION: Not for attaching caster wheels to containers. Use N25000C-2GA caster locks which have tightening features.
• Cast housing material is equal to ASTM A27 GR. 70-40. If GMAW welding to ASTM A36 steel, Lincoln filler wire MC-710XL with shielding gas as required by AWS classification may be used. Also see detail W1 & W2.

Product Notes

• Straight & Bent Handle models available
• Allowable Loading means the maximum rated loading that can be applied to this product in the direction described without causing practical, useful life reduction.
• Locate connectors per "male fitting instructions" on Tandemloc Data Sheet DF-72047-16 (Sheet 2) for standard sized structures.