PROUDLY MADE IN THE USA / Sales: 1-800-258-7324 / All Other Inquiries: 1-252-447-7155

S33000ML FLUSH MOUNTED TIEDOWN RING

Tiedown rings are used to secure cargo during transportation. Fastening a rope, cord, cable, or chain to the ring anchors the item in place, preventing movement and potential damage. Flush-mounted tiedown rings function as surface mount anchor points that include a d ring (or tiedown clevis) that folds inside the base.

The S33000ML series tiedown conforms to Mil Std 209K.

This style incorporates a fully weldable housing that can be flush mounted rather than surface mounted like its sister tiedown, the S33000E series. It rotates 360 degrees about the vertical plane and 150 degrees horizontally. It will swivel and swing to the load plane within these angles. The d ring/tiedown clevis works with hooks or you can lash flat bands to the ring's crossbar. For greater capacity, check out our 10,000 LB. capacity flush swivel tiedown or our 50,000 LB. capacity flush swivel tiedown.

  • Meets MIL-STD 209K - Class 4
  • Load Capacity: 5,000 Lbs. (Single Tension, without yield)
  • Safety Factor to Ultimate Strength: (7,500 LB) is 1.5 Min.
  • Conforms to Large Cargo Tiedown provision in MIL-STD 209K
  • WEIGHT: 5.4 LBs.

We stock self-colored bulk-backed kits; however, a variety of corrosion-resistant finishes are available, including galvanizing followed by a black Dacrokote finish to reduce the reflectivity of the galvanizing (this finish was selected for the medium tactical vehicle replenishment program). The tiedown can be shipped as an assembly if preferred.

Product Notes

  • Tiedown conforms to CLASS 4, MIL-STD 209 & Cargo Bed Tiedown provision MIL-STD 209.
  • This tiedown rotates 360° about its vertical axis and a min of 150° about its horizontal axis. It is designed to swivel & swing to the tension load plane of the tiedown within those angles.
  • ASSEMBLY: After installing the housing (PC1), assemble PCs 2 to 5 into the configuration shown above. (NOTE: To insert PC 4 pins, rotate PC 2 for proper clearance).

Please Register For Price Quote

We are now offering Job Shop Services

Do you need fabrication work done? We offer a complete complement of welding, machining and painting capabilities and invite your inquiry.

Contact Us

RFID

Enhance Operations Track and Authenticate RFID
CLICK FOR MORE INFO

Already a member Login Here

Tie Down Ring Drawing

Note W. Installation Weld

The PC 1 swivel body is cast ASTM A27, GR70-40 steel, a low carbon readily weldable steel. Installation welds can be made on any portion of the vertical sides with a continuous 9/32 to 3/8"fillet or bevel weld around the entire body. The weld symbol above is preferred.

PC. #QTY -100QTY -C00QTY -C01QTY -C02PART NO. AND DESCRIPTION
1 1 1 1 1 S33010ML-1C0 Swivel Housing, Self Colored
2 1 1 - - S33011LD-2C0 Swivel Retainer, Self Colored
3 1 1 - - S33013ML-1C0 Tiedown Clevis, Self Colored
4 1 1 - - S33012LD-1C0 Hinge Pin, Steel Self Colored
5 1 1 1 1 SCP0005XXXX0075 Cotter Pin, 3/64, Stainless Steel
2 - - 1 - S33002ML-MGB Swivel Retainer, Mach. Galv/Black Dimetcote
3 - - 1 1 S33003ML-1GB Tiedown Clevis, Galv./Black Dimetcote
4 - - 1 1 S33004ML-3DL Hinge Pin, Steel Dacromet/Dacrokote Black
2 - - - 1 S33002ML-2GB Swiv. Ret., two halve set, Galv., Bl. Dimetcote