AB68000A Bottom Lift Beam for ISO Containers

These slings are very economical using wire rope slings instead of chain and do not offer load leveling except the model number ending in "-3MPA", which incorporates multiple lift points, offering some side to side load leveling capability.

• PROOF TESTED: Components to at least 125%
• CALCULATED WEIGHT: See chart below
• MATERIAL AND FINISH: PC1 - Steel, painted. PC2 - Steel, bright. PC3 - Steel, thermal zinc sprayed.
• STANDARDS: Specification #EAD21000A applies.
• FINISH: Sandblast, prime and paint safety yellow.
• CUSTOM OPTIONS: Lifter can be customized for your application, inquire for other load capacities or sizes.

Product Notes

• CONTAINER DIMENSIONS: In some cases, I.S.O. Container measured lengths differ from size "L". REF. I.S.O. STD. 668.
• 8" of space is required to replace or remove PC3
• 20'/40' Combo slings have short wire rope legs for a 20' lift & four wire rope extensions for a 40' lift.
• SAFETY: Lifting a 40 ft. ISO freight container with a 30° angle (from horizontal) sling puts the highest allowable forces on the container and corner fittings. Because of this the safety factor is 4:1 to ULT. Avoid actions that will multiply these forces to any degree and take special note of note 2 below.
• GENERAL: All containers, corner fittings, and sling equipment shall be inspected for flaws and damage before use. Only equipment in good condition shall be lifted.
• All vertical dimensions are subject to significant variation due to the accumulation of tolerances for the heavy wire rope lengths. If the vertical dimension is important in your application, ask for a -T00 (PC 2) wire rope shackle with adjusting turnbuckle for finite adjustment.
• Dimensions noted are for reference only and are subject to MFG. tolerance.