 Urethane on Aluminum Wheels
(UA)
Urethane on aluminum core wheels roll easier than rubber and outlast rubber wheels by several times.
Urethane treads are liquid cast and chemically bonded to our aluminum cores. We crown the wheels slightly to reduce the energy needed to turn the wheel when under a heavy load. All
our Urethane tread wheels offer capacities approaching those of steel wheels, outstanding abrasion resistance, oil, and chemical resistance and floor protection. In addition, these wheels are non marking to floors. Many have found these wheels provide excellent
roll-ability and are versatile enough to use on a variety of floor surfaces. |
| Features: |
| • |
Wheel Bearings: Choice of straight roller, ball, or celcon bearing. |
| • |
Temperature Range: -40°to +180°F |
| |
Hub Length: Can be lengthened or shortened to order |
| |
Made in the U.S.A. |
| Physical Properties |
| |
Composition: Synthetic polyester TDI or MDI |
| |
Hardness: 95 durometer Short A+5 |
| |
Elongation at Break: 450% or more |
| |
Tensile Strength: 4000 to 6000 psi |
| |
Tear Strength: 300 to 400
pli-min |
|
