|
|
 |
|
CONTAINER CASTERS AND TOWBARS |
 |
AB24000A-1PA
- Special Towbar

This towbar is a variation from our towbar for containers. It does not incorporate
Twistlocks on the ends, but rather pintle hooks. Let us know how we can build a special for you! |


 |
 |
AB42000A-1PA - Twistlock Towbar

Towbar for towing ISO Containers. Newly designed twistlocking ends quickly secure to the bottom end apertures of ISO 1161 corner fittings and can tow fully loaded 40' containers weighing up to
67,200 lbs. |


 |
 |
AB42000A-5PA -
Twistlock Towbar, 35 Tons WLL

Newly designed twistlocking ends quickly secure to the bottom
end apertures of ISO 1161 corner fittings and can tow fully
loaded 40' containers weighing up to 70,000 lbs. The
AB42000A-5PA is a variation of the AB42000A-1PA in that the
twistlocks have a looser fit, allowing for as much as 20 degree
rotation of the towbar versus 5 degrees for the standard 1PA
model, to account for the differing heights between towing
vehicle and the container. |


 |
 |
AB42000A-6PA - Drop Down Twistlock Towbar

The AB42000A-6PA is a variation of our 1PA and 2PA versions in
that (1) the legs are longer and (2) the connection point/ring
is bent, which allows for a low connection point on the tow
vehicle. |


 |
 |
AC49000A-2PA
Through AC49000-12PA -
Container Casters - From 2,500 LB to 18,000 LB Capacity

Tandemloc Container Casters are designed to rigidly clamp to
ISO 1161 Corner Fittings, commonly found on Intermodal Freight
Containers and many Military Shelters , generator set-ups and
communication vans . Once installed, they provide an efficient
way of mobilizing at low speeds (non-highway use). The common
uses are moving containers in and out of a facility for
maintenance, alterations, upfits or for complexing and loading
shelters. The Container Casters are very rugged products,
available in a wide range of capacities and wheel types for
different surfaces. |


 |
 |
R17000E-1PA - Hydraulic Lift Caster

Hydraulic Lift Casters are wheeled jacks that fit into the ISO corner fitting found on cargo containers and ISO shelters. Along with our container towbar,
you are ready to roll. They come standard with a hand pump, but
a electric pump is available. This particular unit can carry
containers weighing as much as 32,000 lbs. |


 |
 |
R17000F-1PA
- Mega-Duty Hydraulic Lift Caster

Hydraulic Lift Casters are wheeled jacks that fit into the ISO
corner fitting found on cargo containers and ISO shelters. Along
with our container towbar, you are ready to roll. They come
standard with a hand pump, but a electric pump is available.
This particular unit can carry containers weighing as much as
70,000 lbs. |


 |
 |
T10000B-1PA-
Container Cart

This rugged, low riding cart can be towed from either end using our AB42000 series container towbar while carrying containers weighing up to 40,000 lbs. The dual casters at each corner will work best on prepared surfaces, but they can roll over small obstructions with the durable polyurethane tread, which will outlast rubber treads many times over. The cart has 4 twistlock connectors designed to secure ISO freight containers or ISO configurated shelters. |


 |
 |
T10000C-3PA
- ISO Container Cart, 30 Ton Capacity; 32.75" Height

This cart carries 20' ISO containers weighing up to 60,000
lbs. It features pneumatic tires and can be used with an
optional towbar. The container, when carried on this cart is 36.13 inches off the ground. This cart may be customized for 40 foot containers. |


 |
 |
T10000C-4PA
- Container Cart, 8 T Capacity; 37.19" Height

This cart is the result of a request from a Aerospace customer
for an ultra- heavy duty cart that can transport a 20' ISO
container or a smaller 12' non-ISO container along with a
generator. The cart must be off-road capable and be able to
resist the forces presented by rough terrain. The load maximum
of 16,000 lbs along with the cart weight of 7000 lbs. is
supported by four foam filled 7260 lb casters with face contact
wheel brakes. |


 |
 |
T10000E-1PA - 48,000 LB. Cap. Container Cart for 20' ISO Std. Containers

The T10000E-1PA is a very similar to the T10000B-1PA cart. It
has slightly more capacity and height, yet it's wheel spacing is
more inward from the ends. Note that a 40' version is available
by simply ordering a T10000E-2PA and that it has cross bracing
at mid-length for added stiffness. Both work with the
AB42000A-2PA Towbar (ordered separately). |


 |
|
|

 |
|
Call Toll-Free: 1-800-258-7324 • Toll-Free Fax:
1-800-892-3273 • info@tandemloc.com
• Site Map • Contact Us



TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA ·
Legal Information

© 2010 Tandemloc, Inc. All rights reserved. All content displayed on
this site is either the property of, or used with permission by,
Tandemloc, Inc. republication or redistribution of the content,
including by framing or similar means, is prohibited without the prior
written consent of Tandemloc, Inc. The use of any of the content
contained herein by you, or anyone else authorized by you, is
prohibited. Any unauthorized use of the content may violate copyright
laws, trademark laws, the laws of privacy and publicity and statutes of
the U.S. and/or other countries.
TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks
or registered trademarks of Tandemloc, Inc. Any unauthorized use of
these or other Tandemloc, Inc. trademarks is prohibited.

Products include lifting, mobilizing and securing products for below the
hook and ISO container handling. Tandemloc provides
standard corner fittings, lift beams, spreader bars, pipe end caps,
container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.

Designed and deployed by Industrial Advertising ·
Links Page |
 |
|