 |
|
 |
 |
20901AA-1PA - Top Lift Lug Assembly (Vertical Lift)
This lift lug is designed for vertical lift from the top
corner fitting. It incorporates a master link, which may be
lifted from using a hook. It meets ISO 3874. Each lug has a
working load limit of 25,000 lbs and is proof tested to 50,000
lbs. |
|
 |
20901AA-4PA
- Flex Link Top Lift Lug Assembly (for empty containers
only)
ISO allows empty containers to be lifted from the top
corners using an angular sling. This product accomplishes this
and may be used with ISO configured shelters that have been
designed and tested to be lifted at an angle. Each lug has a
working load limit of 17,000 lbs each. The flex link is
specifically designed for this. The other top lift lugs are to
be used vertically ONLY. |
|
 |
416000B-LTZ
- Replacement Rotary Lug, Final Assembly
This lift lug fits to the side apertures of standard ISO 1161 corner fittings. It rotates to any angle of pull, however ISO 1496 does not permit 40' containers to be lifted from the bottom corners at an angle of less
than 30ฐ to the horizontal plane. |
|
|
|
CAREER OPPORTUNITY AT
TANDEMLOC: Mechanical Engineer, preferably
with experience in the design of below the hook lifting devices.
Please send resumes to Tandemloc, 824 Highway 101, Havelock, NC 28532,
attention Sandy Allen or sandy@tandemloc.com.
