TANDEMLOC - Ecommerce Products Table of Contents

HORIZONTAL CLAMP CONNECTOR (VI-SO), B50 TYPE - 12905BA-1PA
The Horizontal Connector that Rigidly Locks. Fits Side and End Holes in ISO 1161 Corner Fittings. One side of the connector is designed to bolt to a structure. The other side engages and clamps to ISO 1161 Corner fittings. It has been used to connect antennas or other electronic devices to military shelters.

LIFT LUG FOR VERTICAL LIFTING - 20901AA-1PA
This lift lug is designed for VERTICAL lifting from the top corner fitting. It may be used with a master link for your sling hook or without. According to ISO 1496 and ISO 3874, when lifting containers from the top corner fittings, the forces must be vertical to prevent compressive loading to the top rail of the container. Empty 20' containers may be lifted at an angle.

LIFT LUG FOR VERTICAL LIFTING (No Ring) - 20901AA-2PA
Same as 20901AA-1PA (above) but without ring. This lift lug is designed for VERTICAL lifting from the top corner fitting. It may be used with a master link for your sling hook or without.

LIFT LUG WITH FLEX LINK FOR ANGULAR LIFTING FROM TOP - 20901AA-4PA
This lift lug is designed for angular lift from the top corner fitting. It incorporates a flex link, (which looks like a chain connecting link, but it is designed AND TESTED for “hinged over” lifting), The lug meets ISO 3874. NOTE: ISO 3874 permits only empty containers to be lifted at an angle from the top corners."

WELDABLE D-RINGS
Forged alloy steel "D-Ring" tiedowns with low carbon steel straps for excellent weldability. 11,700 lbs to 110,000 lbs. average ultimate breaking strength.

TWISTLOCK LEFT BLOCKING - AD54000A
This device is commonly used to stack and lock ISO containers. The "double cone" Twistloc has been a staple in the maritime intermodal business for decades.

WELDABLE FASTMOUNT - N2501BA
This twistlock may welded to the customer's surface or may be purchased welded to a variety of base plates which can have mounting holes for bolt on connection. The Fastmount fits standard ISO corner fittings and offers a typical loose fit lock, allowing for accumulating tolerances between container, corner fitting and the fastmount. For slack-free fit, try the Vertical VISO's, #K08A00A-1PA. The fastmount may be used on ship decks or trailers to secure containers.

Call Toll-Free: 1-800-258-7324 • Toll-Free Fax: 1-800-892-3273 • info@tandemloc.com • Site Map • Contact Us

TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA · Legal Information

© 2010 Tandemloc, Inc. All rights reserved. All content displayed on this site is either the property of, or used with permission by, Tandemloc, Inc. republication or redistribution of the content, including by framing or similar means, is prohibited without the prior written consent of Tandemloc, Inc. The use of any of the content contained herein by you, or anyone else authorized by you, is prohibited. Any unauthorized use of the content may violate copyright laws, trademark laws, the laws of privacy and publicity and statutes of the U.S. and/or other countries. TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks or registered trademarks of Tandemloc, Inc. Any unauthorized use of these or other Tandemloc, Inc. trademarks is prohibited.

Products include lifting, mobilizing and securing products for below the hook and ISO container handling. Tandemloc provides standard corner fittings, lift beams, spreader bars, pipe end caps, container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.

Designed and deployed by Industrial Advertising · Links Page