Connectors for securing ISO containers, twistlocks, weld d-rings, MIL Std 209 tiedowns
Tandemloc will be closed on December 24th and will re-open for business on Monday, January 5th.
Merry Christmas and Happy New Year!
 

CONTAINER TIEDOWNS - TABLE OF CONTENTS

See Helpful Information Concerning ISO Containers - general info developed from ISO 668, 1161, 1496 and 3874 - view online or download as PDF.


Twistlock Tiedowns, General Purpose

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Twistlock, Left Blocking
This device is commonly used to stack and lock ISO containers. The "double cone" Twistlock has been a staple in the maritime intermodal business for decades.
AD54000A-1GA
Double Cone Two Position Twistloc with "Pre-Lock" Feature
Tabs on bottom cone help guard against accidental dislodgement from the corner fitting during loading and unloading. Commonly used to connect cargo containers stacked on ships. Hot dipped galvanized with stainless steel internal mechanisms.
AE10000A-1GA
Weldable Fastmount
This Twistlock may be welded to the customer's surface or may be purchased welded to a variety of base plates which can have mounting holes for bolt on connection.
N2501BA-1PA
-2PA, -3PA, -PA

Twistlocks, Special Purpose

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Height Extender with Shock Absorber
This product was developed for applications where vibration and shock loading to containers or shelters (with ISO corner fittings) are to be minimized.
90401SA-CPA
ISO Corner Pulling Twistlock
Fits end and side apertures of both top and bottom ISO Corner Fittings. Insert and twistlocking the into the corner fitting, spin the nut to remove slack. Weldable. May be provided as a kit to facilitate painting or welding into your structure or shipped assembled.
T15000A

Container on Trailer Twistlocks

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Trailoc, Retractable Universal Type w/ Bent Handle
When retracted, the Twistlock is flush with the bed, enabling the flatbed to carry non containerized cargos. A very economical device, the Trailoc, with bent handle and hot dipped galvanized internal castings.
806000N-U00
Trailoc, Retractable Universal Type w/ Bent Handle
Well suited for flat bed trailers. When retracted, the Twistlock is flush with the bed, enabling the flatbed to carry non-containerized cargo.Economical. Bent handle and hot dipped galvanized internal castings.
806000T-100
Drop In Twistlock
This very inexpensive Twistlock is easy to install. It remains raised, ready for use. Fits ISO corner fittings and is weldable.
S38000B-1PA
The 3-in-1 Tiedown
The 3-in-1 Tiedown incorporates two Tiedowns per Mil Std 209 and one Twistlock per ISO 3874 all in one weldable housing. Excellent choice for flatbeds. Built to last with hot dipped galvanized parts.
T12000D
Screw Down Retractable Twistlock
Screw-down feature provides a tight connection. Spring loaded "trigger" captures the spin nut and will not loosen. The screw-down Twistlock internal sub assembly can be used in our standard Retractable Trailoc housing, or the "3-in-1" type housing.
T12000E
Very Shallow Combo Twistlock & Tiedown Set
Features a "screwdown" shallow depth ISO Twistlock and two Mil Std 209 Tie downs. Beneficial when space is at a premium. Incorporates all of the features of the T12000D, including a mechanism to prevent unwanted "unscrewing" or loosening while traveling over rough terrain.
T42000C

Container Connector Clamps

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Horizontal Connector
The TANDEMLOC CONNECTOR is a convenient device used for connecting containers, shelters or other structures together horizontally. Containers and shelters with ISO corner fittings can be clamped together, rigidly with a slack-free connection.
12900BA-1PZ
Horizontal Clamp Connector (VI-SO), B50 Type
One side of the connector is designed to bolt to a structure. The other side engages and clamps to ISO 1161 Corner fittings.
12905BA-2PA
Vertical Clamp Connector (VI-SO)
The VISO fits ISO 1161 Corner Fitting large aperture and incorporates a clamping action that removes any slack between the corner fitting and the body of the connector. Use whenever a slack free connection is preferred.
K08A00A-1GA
Universal Bridge Clamp for ISO Corner Fittings
The "bridge clamp" clamps corner fittings together in tension and fits any aperture.
P0500AC-1PZ

Corner Fittings

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Steel Corner Fittings

Meet ISO 1161 and are ABS certified. They are available in Top Right, Top Left, Bottom Right and Bottom Left fittings. Readily weldable. These are the fittings found on all ISO type Containers used in intermodal shipping.

243000C
Tandemloc's Aperture Plate
Useful when the other apertures (side and end "holes") found on ISO corner fittings are not needed. Aperture Plates are weldable and compatible with the large selection of connectors and twistlock devices that ordinarily fit into the same opening found in the corner fitting.
90417AA-1C0

Container Inspection and Maintenance Stands

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Container Inspection and Maintenance Stand
Support loaded ISO containers high enough to do container inspections and repairs. Stands connect to ISO container corner fittings. Each stand has a capacity of 40,000 lbs for a total load capacity of 80,000 lbs with winds of up to 15 miles per hour.
AE14000A-1PA

ISO Container Lifting Leg

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
ISO Container Lifting Leg
For applications that require ISO Shelters or Containers to sit level on uneven surfaces, the ISO Container Leveling Legs are the solution. Each leg can be individually adjusted in 1/4 inch increments up or down, with a total adjustment range of 12 inches per leg.
L09A00A

Steel Container Pedestal

CLICK LINK for MODEL-SPECIFIC DETAILS: TLOC PART NO
Steel Container Pedestal
If combinations of military containers and commercial containers are shipped together, the overall heights of stacked containers can differ from one another and this could create a problem for lashing. The pedestal is also useful with open top containers and flatracks where cargo is projecting above the top of the corner fittings, hampering stacking or lifting.
77004S
News at Tandemloc
  New Products: Pallet Lifters: See our new line of heavy-duty pallet lift equipment. Capacities range from 1 ton to 3 ton. More about TLOC Pallet Lifts!
  Tandemloc Wins North Carolina Safety Award! North Carolina Commissioner of Labor Cherie Berry presented Curt Pope...read more...
  On the cover of Wire Rope Exchange magazine! See Tandemloc in this recent issue of Wire Rope Exchange - a little bit about us and our products!
Tandemloc Services
  RENT Tandemloc Equipment! We maintain a huge stock of lifting, securing and container mobilizing products for short and long-term rental.
  Proof Testing All Lifting Products: Our patent-pending 300 Ton Load Tester is a unique system affording reliable testing for all of our products.
  Maintenance and Repair of Tandemloc lifters: Certified inspectors using documented procedures in accordance with ASME B30.20 standards.
QUICK INQUIRY

Your Name:

Company:

Email Address:

Notes:

Products include lifting, mobilizing and securing products for below the hook and ISO container handling. Tandemloc provides standard corner fittings, lift beams, spreader bars, pipe end caps, container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more. See Site Map.

TANDEMLOC, Inc 824 Highway 101 Havelock, NC 28532 USA

Toll-Free Tel: 1-800-258-7324 Toll-Free Fax: 1-800-892-3273 International Tel: (252) 447-7155 International Fax: (252) 447-5502 info@tandemloc.com

This website contains the proprietary information of Tandemloc, Inc. and its affiliates and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use. You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer, decompile, or take any other action to reproduce or replicate any aspect of this Website or the information contained herein.  Website Terms of Use

TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks of Tandemloc, Inc.
Any unauthorized use of these or other Tandemloc, Inc. trademarks is prohibited.

Tandemloc is an Equal Opportunity Employer

© 2014 Tandemloc, Inc. All rights reserved.

Designed and deployed by Industrial Advertising Links Page