|
The Bolt on D-Ring is perfect when a
welded (permanent) lashing point is undesirable, or perhaps
the surface is not weldable. Another bonus is this assembly
can be fully proof tested by Tandemloc unlike the weld down
types that only offer the potential for a limited test, since
you weld the strap to your structure...
Of course, like most of our products, this item is
customizable. We can offer differing capacities, plate sizes
and bolt hole patterns. The bolts shown are not included.
• Please note that the strength ratings expressed are
"ultimate" loads or "Breaking Loads" and not "working loads."
The strength is based on a single
vertical pull, although most applications will result in the
load direction to be at an angle or a compound angle.
• Please consider the angle(s) of pull you will encounter with
your application as it increases the strain on the tie down at
any given weight load. |
|
• |
PLATE MATERIAL: ASTM A36 Steel .75" Thick.
D-RING MATERIAL:
Click here
STRAP MATERIAL:
Click here |
|
• |
Bolt holes are countersunk for flush flat head cap screws installation. |
| |
• |
Use 1/2" Alloy Cap Screw |
|
• |
See the
D-Ring and Strap page
for D-Ring and Strap Dimensions and Strength Data. |
| |
• |
BOLT PLATE FINISH: Thermal Zinc Coating after assembly
STRAP FINISH: Thermal Zinc Coating after assembly
D-RING FINISH: Hot Dip Galvanized |
|
• |
Weight: 8.7 LB. |
|
• |
D-rings and straps are self-colored
or primer-painted and bulk packed. D-rings and straps have
temporary corrosion resistance; however, minimal rust
spotting due to abrasion from bulk packaging should be
expected. |
BUY ONLINE
$132.10 Each Unit
Prices FOB Destination - Continental United
States!
Call
for pricing to other areas.
Enter quantity desired and click 'Add to
Cart' button. |
PRICE QUOTE
For large quantity or custom orders, please contact us for a price quotation:
|
 |
| For custom configurations, pricing, design and delivery schedules - any questions at all. |
|
|
|
|
|
|
|
Note that loads are expressed as breaking loads and not working load limit, which is to be determined by the user. Apply an appropriate safety factor. If used for lifting the safety factor should be 5:1 and the item should be proof tested. |
|
| Product Photo
|
|
|
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_9202-P46GTZ.pdf
Type: Adobe Acrobat Document
Size: 110 KB
|
Need Credit? Let us know.
(Note: Credit Applications will only be processed with an accompanying
purchase order.) |
|
|
CAREER OPPORTUNITY AT
TANDEMLOC: Mechanical Engineer,
preferably with experience in the design of below the hook lifting
devices. Please send resumes to Tandemloc, 824 Highway 101, Havelock,
NC 28532, attention Sandy Allen or sandy@tandemloc.com.
