|
|
Custom Spreader Bars
without the
custom price and without the custom lead time!
TANDEMLOC SPREADER BAR
KITS
AC25C "END CAPS"
Specifications and Drawings
Patent Pending |
|
This item may be available for rental.
Click for
more information about renting
this and other Tandemloc
equipment. |
|
Save freight costs by purchasing
the pipe locally, (especially on very long and heavy pipe)
or keep a few different diameters and lengths on hand for
versatility. With Spreader Bar End Caps, you will always
be ready to make that lift. Spreader Bar End caps are
available for heavy loads and can be shipped by common
carrier. They are relatively easy to install and built to
last.
Spreader Bar End Caps are proof
tested by TANDEMLOC. Also, see our
pipe connection sleeves which allow you to quickly
create longer spreader spans.
Please Note: Competitor’s designs hole locations are
designed for a specific sling angle (45° assumed.) If a
different angle is used, the load couples (due to their
eccentric position relative to each other and the pipe
centerline) will not cancel out and a bending load will be
applied to the spreader pipe, reducing its useable length.
Tandemloc’s endcaps are sling angle independent in that at
any sling angle (from 0 to 89°) the load applied to the pipe
will be strictly axial, and no bending load will ever be
applied, maximizing the column strength of the spreader.
This due to the top hole location on the Competitor’s
designs being located above the pipe centerline and
eccentric to the bottom lift hole.
End Eye Cap Specification Table
| |
• |
WORK LOAD LIMIT (WLL): See table below... |
| |
• |
PROOF TESTED: See table below for test loads. |
| |
• |
CALCULATED WEIGHT: See table below. |
|
• |
FINISH: Painted safety
yellow.
See drawing for Notes (see sheet 1) |
|
• |
Designed & constructed to
conform to ASME B30.20 & AWS D14.1. Testing also
conforms to OSHA 2232. Made for use in temperature range of
120°F. to -40°F. |
|
• |
Standard specification #EAD21000A Applies |
|
• |
Material is steel, painted yellow.
|
|
• |
Spreader bar assemblies made up of End Caps and cut to
length pipe can be proof tested & certified for the loads
shown in the chart below upon request. |
|
• |
Use two end caps, one on each
end of spreader pipe for a capacity of 2x the end cap work
load limit. |
| |
• |
Use manual #SAC25C, included with each set of pipe caps. |
| |
• |
Because of dimensional modifications, the end caps made
after 5/31/2003 may not provide the span or have safety pin
hole alignment with spreader pipes made to SAC22P dimensions
prior to 5/31/2003. End Caps are available to fit those
conditions. Contact your Tandemloc account manager for
information |
| |
• |
Each pipe cap has a label with data as shown below and
the nominal pipe size it fits. Label may say “Sched 60 wall
instead of “Sched 80 wall” depending on size of end cap. |
| |
• |
Each end cap over 8" has one or two D-rings for
lifting the end cap only. |
| |
|
 |
|
|
Please Note: When building a spreader bar assembly using the AC25C End Eye Caps, capacities will be dependant upon using the pipe and span as specified on:
Standard Spreader Pipe for Use with
AC25C End Eye Caps (AC22P)
It is the user's responsibility to conform to the span and the pipe specifications exactly as
indicated!
Caution: Never use a sling angle of less than specified. NEVER EXCEED THE WORK LOAD LIMIT (WLL) for the pipe, per the span indicated, nor the capacity of the end cap! Failure to stay within these limits could result in lifter assembly failure, leading to property damage, injury or death from a falling load. |
|
| Product Photo
|
|
|
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_AC25C.pdf
Type: Adobe Acrobat Document
Size: 364 KB
|
Need Credit? Let us know.
(Note: Credit Applications will only be processed with an accompanying
purchase order.) |
|
|
END EYE CAP SPECIFICATIONS
ORDER #
FOR NORMAL SERVICE*** |
A |
C |
E |
G |
H |
J |
KT |
KB |
L1 |
L2 |
M |
N |
R |
S |
WEIGHT |
WLL OF SINGLE END CAP |
SPREADER PIPE SIZE
"P" (NPS) |
WORK LOAD
LIMIT FOR A SPREADER ASSEMBLY WITH END CAPS AND AT MAX. SPAN
BETWEEN END CAP HOLES. |
"Q" MIN. TOP
LIFT ANGLE |
T |
U |
For custom configurations,
pricing, design
and delivery
schedules - any questions at all.
|
|
WLL |
MAX SPAN
AT 45° |
PROOF TEST LOAD |
| AC25C-007030EH |
|
6.75 |
2.75±.03 |
2 |
3.63 |
3 |
1.5 |
1.50 |
1.75 |
1.75 |
3.00 |
3.14 |
5.70 |
1.25 |
18.2 |
14,000 LB. |
3" EXTRA HEAVY* |
28,000 LB. |
11 FT (132") |
17,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
 |
| AC25C-013030EH |
|
8.25 |
2.75±.03 |
2 |
3.63 |
4 |
2.25 |
2.25 |
2 |
2 |
3.00 |
4.2 |
6.76 |
1.75 |
29.4 |
26,000 LB. |
3" EXTRA HEAVY* |
52,000 LB. |
5 FT (60") |
32,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-013040EH |
|
9.00 |
3.63±.03 |
2 |
4.63 |
4 |
2.25 |
2.25 |
2 |
2 |
4.00 |
4.2 |
7.47 |
1.75 |
30.1 |
26,000 LB. |
4" EXTRA HEAVY* |
52,000 LB. |
12 FT (144") |
32,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-013050EH |
|
9.75 |
4.63±.04 |
2 |
5.75 |
4 |
2.25 |
2.25 |
2 |
2 |
5.00 |
4.38 |
8.35 |
1.75 |
47.5 |
26,000 LB. |
5" EXTRA HEAVY* |
52,000 LB. |
20 FT (240") |
32,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-013060EH |
|
10.25 |
5.56±.05 |
2 |
6.75 |
4 |
2.25 |
2.25 |
2 |
2 |
6.00 |
4.38 |
9.06 |
1.75 |
64.7 |
26,000 LB. |
6" EXTRA HEAVY* |
52,000 LB. |
27 FT (324") |
32,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-025040EH |
|
12.97 |
3.63±.03 |
2 |
4.63 |
5.5 |
2.5 |
2.50 |
2.75 |
2.75 |
4.00 |
7.01 |
10.28 |
2.13 |
83.7 |
50,000 LB. |
4" EXTRA HEAVY* |
100,000 LB. |
6 FT (72") |
62,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-025050EH |
|
13.47 |
4.63±.04 |
2 |
5.75 |
5.5 |
2.5 |
2.50 |
2.75 |
2.75 |
5.00 |
7.01 |
10.98 |
2.13 |
94.6 |
50,000 LB. |
5" EXTRA HEAVY* |
100,000 LB. |
8 FT (96") |
62,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-025060EH |
|
14.43 |
5.56±.05 |
2 |
6.75 |
5.5 |
2.5 |
2.50 |
2.75 |
2.75 |
6.00 |
7.33 |
12.01 |
2.13 |
123 |
50,000 LB. |
6" EXTRA HEAVY* |
100,000 LB. |
17 FT (204") |
62,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-025080EH |
|
15.43 |
7.38±.07 |
2 |
8.75 |
5.5 |
2.5 |
2.50 |
2.75 |
2.75 |
8.00 |
7.33 |
13.43 |
2.13 |
168.9 |
50,000 LB. |
8" EXTRA HEAVY* |
100,000 LB. |
32 FT (384") |
62,500 LB. |
ASMEB30.20 |
45 |
2 |
1 |
|
| AC25C-045060EH |
|
14.75 |
5.56±.05 |
2 |
6.75 |
6.75 |
3.25 |
3.25 |
3.38 |
3.38 |
6.00 |
7.56 |
12.24 |
3.13 |
183.4 |
90,000 LB. |
6" EXTRA HEAVY* |
180,000 LB. |
6 FT (72") |
99,000 LB. |
OSHA2232 |
45 |
2 |
1 |
|
| AC25C-045080EH |
|
17.36 |
7.38±.07 |
2 |
8.75 |
6.75 |
3.25 |
3.25 |
3.38 |
3.38 |
8.00 |
8.7 |
14.79 |
3.13 |
246.5 |
90,000 LB. |
8" EXTRA HEAVY* |
180,000 LB. |
27 FT (324") |
99,000 LB. |
OSHA2232 |
45 |
2 |
1 |
|
| AC25C-045100EH |
|
18.50 |
9.58±.03 |
2 |
10.88 |
6.75 |
3.25 |
3.25 |
3.38 |
3.38 |
11.00 |
8.93 |
16.53 |
3.13 |
286.8 |
90,000 LB. |
10" EXTRA HEAVY** |
180,000 LB. |
37 FT (384") |
99,000 LB. |
OSHA2232 |
45 |
2 |
1 |
|
| AC25C-065100EH |
|
21.25 |
9.58±.03 |
2 |
10.88 |
8 |
4 |
4 |
4.5 |
4.5 |
11.00 |
10.87 |
18.48 |
4 |
414.5 |
130,000 LB. |
10" EXTRA HEAVY** |
260,000 LB. |
18 FT (216") |
143,000 LB. |
OSHA2232 |
45 |
2 |
1 |
|
| AC25C-065120EH |
|
22.75 |
11.48±.03 |
4 |
12.88 |
8 |
4 |
4 |
4.5 |
4.5 |
13.50 |
11.31 |
19.8 |
4 |
492.5 |
130,000 LB. |
12"
EXTRA HEAVY |
260,000 LB. |
30 FT (360") |
143,000 LB. |
OSHA2232 |
45 |
4 |
1.56 |
|
| AC25C-085140EH |
|
20.75 |
12.61±.03 |
4 |
14.28 |
9.5 |
4 |
4 |
5 |
5 |
14.50 |
13.83 |
16.06 |
4 |
584.0 |
170,000 LB. |
14"
EXTRA HEAVY |
340,000 LB. |
45 FT (540") |
187,000 LB. |
OSHA2232 |
60 |
4 |
1.56 |
|
| AC25C-250260EH |
|
25.00 |
24.68±.03 |
6 |
26.50 |
12 |
5.5 |
5.5 |
8 |
8 |
26.00 |
11.34 |
24.83 |
5 |
2,017.7 |
500,000 LB. |
26"
EXTRA HEAVY |
1,000,000 LB. |
66 FT (792") |
550,000 LB. |
OSHA2232 |
60 |
6 |
2 |
|
| AC25C-552320EH |
|
35.25 |
30.62±.03 |
7 |
32.50 |
17 |
8.12 |
7.34 |
11 |
11 |
26.50 |
25.50 |
26.42 |
See
DIM A |
3,721.4 |
1,104,000 LB. |
32" EXTRA HEAVY |
2,208,000 LB. |
79 FT (948") |
1,214,400 LB. |
OSHA2232 |
70 |
7 |
2 |
|
| AC25C-772320EH |
|
39.95 |
30.62±.03 |
7 |
32.50 |
20.25 |
9.31 |
8.75 |
14 |
12.25 |
26.50 |
25.39 |
33.43 |
See
DIM A |
4,450.0 |
1,544,000 LB. |
32" EXTRA HEAVY |
3,088,000 LB. |
55 FT (660") |
1,698,400 LB. |
OSHA2232 |
70 |
7 |
2 |
|
|
* - Or Schedule 80
** - Or Schedule 60
*** -
NOTE: The order numbers in the above left hand column are to
order End Eye Caps for standard service temperature per
Tandemloc standard #EAD21000A.
To order low temperature arctic type lift gearalso per
Tandemloc standard EAD21000A, add prefix "L" to the above
noted standard number.
For example, AC25C-045089EH standard order no. becomes
LAC25C-045089EH arctic order no. |
|
|
STEEL SPREADER PIPE* CAPACITYCHART |
Work load
limits are shown in tons (2,000 lb.), loads are in conformance to ASME B30.9c and B30.29. Steel pipe conforms to ASTM A500
Grade B, ASTM A53 grade B, or any structural pipe rated at
35,000 psi or greater and for low temperature service (to -50°F)
to ASTM A333/333M GR 6 or 7.
*Wall thickness is defined in chart.
Non shaded region shows end cap assemblies where capacity is
reduced due to span and/or sling angle. Shaded region shows
assembly lengths that are limited by end cap capacities. Custom
made end eye caps are available on request.
**Top sling lift angle to horizontal
X : Section too long for safe lifting
- : Uncalculated at this date, call for details |
| NOM. PIPE SIZE/lb. per ft. |
3"/10.25#ft |
4"/14.98ft |
5"/20.78#ft |
6"/28.57#ft |
8"/43.39#ft |
10"/54.74#ft |
12"/65.42ft |
14"/72.09#ft |
26"/136.2#ft |
32"/168.2#ft |
| INNER DIA./wall thickness |
2.90/.300 |
3.826/.337 |
4.813/.375 |
5.761/.432 |
7.625/.500 |
9.750/.500 |
11.750/.500 |
13.000/.500 |
25.000/.500 |
32.000/.500 |
|
LIFT ANGLE** |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
30° |
45° |
60° |
|
|
60° |
|
|
70° |
 |
3 FT. |
14 |
25 |
26 |
22 |
39 |
50 |
32 |
50 |
50 |
90 |
90 |
90 |
90 |
90 |
90 |
130 |
130 |
130 |
130 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 6 FT. |
13 |
23 |
26 |
20 |
36 |
50 |
31 |
50 |
50 |
43 |
75 |
90 |
90 |
90 |
90 |
130 |
130 |
130 |
130 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 8 FT. |
11 |
20 |
26 |
19 |
33 |
50 |
29 |
50 |
50 |
40 |
70 |
90 |
65 |
90 |
90 |
84 |
130 |
130 |
130 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 10 FT. |
9 |
16 |
26 |
17 |
30 |
50 |
26 |
46 |
50 |
39 |
68 |
90 |
63 |
90 |
90 |
82 |
130 |
130 |
100 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 15 FT. |
4.5 |
8 |
14 |
11 |
20 |
35 |
20 |
36 |
50 |
33 |
57 |
90 |
56 |
90 |
90 |
- |
130 |
130 |
95 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 20 FT. |
2 |
4 |
7 |
6 |
11 |
19 |
15 |
26 |
45 |
25 |
44 |
77 |
49 |
86 |
90 |
70 |
122 |
130 |
89 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 25 FT. |
X |
X |
X |
4.5 |
8 |
14 |
9 |
17 |
30 |
17 |
30 |
52 |
41 |
71 |
90 |
63 |
109 |
130 |
82 |
130 |
130 |
170 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 30 FT. |
X |
X |
X |
X |
X |
X |
6 |
11 |
19 |
12 |
21 |
36 |
31.8 |
55 |
90 |
55 |
95 |
130 |
75 |
130 |
130 |
120 |
170 |
170 |
- |
- |
- |
- |
- |
- |
| 35 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
8 |
15 |
26 |
23 |
40 |
70 |
45 |
79 |
130 |
68 |
118 |
130 |
89 |
154 |
170 |
- |
- |
- |
- |
- |
- |
| 40 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
5.7 |
10 |
17 |
18 |
31 |
54 |
35 |
62 |
108 |
55 |
101 |
130 |
68 |
118 |
170 |
- |
- |
- |
- |
- |
- |
| 45 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
11 |
20 |
35 |
23 |
40 |
70 |
47 |
81 |
130 |
54 |
93 |
170 |
- |
- |
- |
- |
- |
- |
| 50 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
28 |
49 |
32 |
55 |
96 |
44 |
76 |
141 |
- |
- |
- |
- |
- |
- |
| 55 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
16 |
28 |
26 |
45 |
79 |
36 |
63 |
116 |
- |
- |
- |
- |
- |
1544 |
| 60 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
8 |
14 |
23 |
40 |
69 |
30 |
53 |
91 |
- |
- |
- |
- |
- |
- |
| 66 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
19 |
33 |
57 |
26 |
45 |
74 |
- |
- |
500 |
- |
- |
|
| 70 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
22 |
39 |
67 |
- |
- |
- |
- |
- |
- |
| 79 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
17 |
30 |
52 |
- |
- |
- |
- |
- |
1104 |
| 90 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
- |
- |
- |
- |
- |
- |
| 100 FT. |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
X |
- |
- |
220 |
- |
- |
- |
|
|
|
|
|
Call Toll-Free: 1-800-258-7324 • Toll-Free Fax:
1-800-892-3273 • info@tandemloc.com
• Site Map • Contact Us
TANDEMLOC, Inc · 824 Highway 101 · Havelock, NC 28532 USA ·
Legal Information
© 2010 Tandemloc, Inc. All rights reserved. All content displayed on
this site is either the property of, or used with permission by,
Tandemloc, Inc. republication or redistribution of the content,
including by framing or similar means, is prohibited without the prior
written consent of Tandemloc, Inc. The use of any of the content
contained herein by you, or anyone else authorized by you, is
prohibited. Any unauthorized use of the content may violate copyright
laws, trademark laws, the laws of privacy and publicity and statutes of
the U.S. and/or other countries.
TANDEMLOC™, TANDEMLOC® logo, and TANDEMLOC AUTOLOC® are the trademarks
or registered trademarks of Tandemloc, Inc. Any unauthorized use of
these or other Tandemloc, Inc. trademarks is prohibited.
Products include lifting, mobilizing and securing products for below the
hook and ISO container handling. Tandemloc provides
standard corner fittings, lift beams, spreader bars, pipe end caps,
container lifting devices, lifting attachments, twistlocks, d-rings, heavy duty casters, container casters, container lifting dollies and more.
Designed and deployed by Industrial Advertising ·
Links Page |
|
|
