|
|
ROTARY LUG WITH
SECURING FEATURE (416000C-LSTZ) replaces the 416000C-SPA.
|
|
BUY
416000C-LSTZ ONLINE
Rotary Lift Lug with Safety Lock
$384.73
Each Unit
Prices FOB Destination - Continental
United States!
Call for pricing to other areas.
Enter quantity desired and click 'Add to
Cart' button. |
PRICE QUOTE
For larger quantity orders (7+ units) or custom options,
please
contact us for a price quotation:
|
|
|
|
|
416003C-1TZK: Safety Lock Kit Only |
|
|
|
• |
WLL: 33,600 LB. |
|
• |
PROOF TESTED to 2x WLL. |
|
• |
WEIGHT:
-LSTZ Assembly: 22.3 LB.
416003C-1TZK Kit: 6.3 LB. |
|
• |
FINISH: Coated with Thermal Zinc
|
|
• |
Standard specification #EAD21000A Applies |
|
• |
Set of Four Required per container.
|
|
• |
This lift lug fits to the side apertures of standard ISO 1161 corner fittings. It rotates to any angle of pull, however ISO 1496 does not permit 40' containers to be lifted from the bottom corners at an angle of less that 30 degrees to the horizontal plane. The lugs fit left hand or right hand corner fittings. They do not require shackles to connect to the sling. Each
is proof tested and have zinc thermal spray finish. (Zinc thermal spray is a sprayed on coating of hot zinc and is similar to hot dipped galvanizing). It is simple to
use. Just insert the "toe", twist 90° and lift. The roof wall of the corner fitting captures the toe and prevents fall out.
The body of the assembly rotates around the toe. |
|
|
Product Photo |
|
|
|
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_416000C.pdf
Type: PDF File
Size: 250 KB
|
|
For the
416003C-1TZK Safety Lock Kit
Login / register to activate:
TANDEMLOC_416003C-1TZK.pdf
Type: PDF File
Size: 50 KB
|
|
|
| |
|
 |
|
|
USE:
Use the rotary lift lug to connect lifting slings to the
bottom side apertures in ISO 669 type freight container corner
fittings (ISO 1161). When toe of the lug is inserted into
the aperture, it is rotated manually, using the crosspin, to a
lock position 90° offset from its entry position. When the
sling is lifted, the flat sides of the toe head bear up onto
the internal "ceiling" wall of the corner fitting and are thus
held in the lock position during the lift. Because the body of
the rotary lug freely rotates about the toe head, the lift
sling leg can assume any angle from between 30°* to 90° from
horizontal without changing the internal bearing of the toe
head inside the corner.
The - LSTZ assembly has an additional safety feature to help
prevent the lug from accidental dislodgement, under unstable
dynamic conditions, where it is not practical to have
personnel standing by to insure that the 90° interlock of the
toe in the corner fitting is maintained prior to the final
lifting.
To insert the -LSTZ assem., align the toe head for entry into
the aperture in the corner fitting. Tilt the body back
slightly and lay the bottom ball lock inside the aperture,
depressing it as the body is tilted up against the side of the
corner and allowing the top ball lock to enter the aperture.
Push against the body & manually turn the toe from the
opposite end, using the crosspin to grip and turn it. Since
the crosspin is in the same plane as the toe head you will see
when the 90° interlock is achieved. Once interlocked, the ball
locks expand to resist dislodging. To remove, reverse the
procedure. |
|
|
| NOTE 1: Once the Rotary lift lug is connected
to a lift pendant, Loctite solution should be used on
threads of the PC 5 Set screw to prevent unscrewing. |
|
416003C-LSTZ: Safety Lock Kit Only |
•
For use in temperatures from 120° F to minus 40°
F.
•
The upgraded safety assembly has an additional safety
feature to help prevent the lug from accidentally
dislodgement, under unstable dynamic conditions, where
it is not practical to have personnel standing by to
insure that the 90° interlock of the toe in the corner
fitting is maintained prior to the final lifting. |
|
|
|
The TANDEMLOC
Rotary Lift Lug is designed to connect lifting slings to the bottom side apertures in ISO
668 type freight container corner fittings (ISO 1161).