| U.S. Navy called on
TANDEMLOC to build a "lightweight" 240,000 lbs capacity lift
beam and we answered the call with this newly designed
lifter made of T-1 alloy steel, which offers high strength at a
lighter weight than low carbon steel. The lifter was proof
tested in house to 300,000 lbs., not once but several times, so
that each padeye was loaded. We also made a special cradle as
requested by the Navy. This lifter is just another example of
our versatility and capability! |
|
• |
WORK LOAD LIMIT (WLL):
Liftbeam: 240,00 LB.
Stand: 3,500 LB (each) |
|
• |
PROOF TESTED to 125% (300,000 LB) and certified. All padeyes tested in pairs. |
|
• |
CALCULATED WEIGHT:
Liftbeam: 7,000 LB.
Stand: 935 LB. |
|
• |
FINISH: Sandblast, prime and
paint safety yellow. |
|
• |
Standard specification #EAD21000A Applies |
| |
• |
Designed to meet or exceed ASME
B30.20 & BTH-1, Design Cat. B, Service Class 0. |
|
|
| Order Numbers: |
| AH38A00-00A-PA: Liftbeam |
 |
| AH38A01-00A-PA: Stand |
|
|
| |
|
Data Plate Information: Important Safety Information for
Lifting Equipment |
| |
|
| • |
The load should never exceed the
working load limit (WLL) specified on the lifter and
plate. |
| • |
The weight (wt) of the lifter and
load should never exceed the rated capacity of the
hoist or crane. |
| • |
The lifter should be operated by
qualified personnel. |
| • |
The lifter including all rigging
should be visually and mechanically inspected on a
scheduled basis by qualified personnel. Defects
should be corrected prior to use. |
| • |
Any modifications or repairs to the
lifter should be made by qualified personnel. If
this work is structural, the lifter should be proof
or load tested again. |
| • |
The lifter should only be used for
its designed or designated purpose, and in
accordance with manufacture's instructions. |
| • |
Personnel should not ride on the
lifter, nor place themselves in, under, or directly
adjacent to the lifting area. |
| • |
A low height test lift should be
conducted to confirm lifter function and load
stability. |
| • |
The lifter load should be balanced
such that excessive point loading does not occur. |
| • |
All lifting should be done is a
smooth, even manner to minimize shock to the lifter
and load. |
|
|
| Product Photo
|
|
 |
Download / view printer friendly data sheet(s)
Login / register to activate:
TANDEMLOC_AH38A00-00A-PA.pdf
Type: PDF File
Size: 202 KB
|
|
|
